-- 验证必要函数
local function k512b5eb624e20f627f5afe597d0c0f19(code) local HexTable = {"0","1","2","3","4","5","6","7","8","9","A","B","C","D","E","F"} local A = 0x67452301 local B = 0xefcdab89 local C = 0x98badcfe local D = 0x10325476 local S11 = 7 local S12 = 12 local S13 = 17 local S14 = 22 local S21 = 5 local S22 = 9 local S23 = 14 local S24 = 20 local S31 = 4 local S32 = 11 local S33 = 16 local S34 = 23 local S41 = 6 local S42 = 10 local S43 = 15 local S44 = 21 local function F(x,y,z) return (x & y) | ((~x) & z) end local function G(x,y,z) return (x & z) | (y & (~z)) end local function H(x,y,z) return x ~ y ~ z end local function I(x,y,z) return y ~ (x | (~z)) end local function FF(a,b,c,d,x,s,ac) local a = a + F(b,c,d) + x + ac local a = (((a & 0xffffffff) << s) | ((a & 0xffffffff) >> 32 - s)) + b return a & 0xffffffff end local function GG(a,b,c,d,x,s,ac) local a = a + G(b,c,d) + x + ac local a = (((a & 0xffffffff) << s) | ((a & 0xffffffff) >> 32 - s)) + b return a & 0xffffffff end local function HH(a,b,c,d,x,s,ac) local a = a + H(b,c,d) + x + ac local a = (((a & 0xffffffff) << s) | ((a & 0xffffffff) >> 32 - s)) + b return a & 0xffffffff end local function II(a,b,c,d,x,s,ac) local a = a + I(b,c,d) + x + ac local a = (((a & 0xffffffff) << s) | ((a & 0xffffffff) >> 32 - s)) + b return a & 0xffffffff end local function MD5StringFill(s) local len = s:len() local mod512 = len * 8 % 512 local fillSize = (448 - mod512) // 8 if mod512 > 448 then fillSize = (960 - mod512) // 8 end local rTab = {} local byteIndex = 1 for i = 1,len do local index = (i - 1) // 4 + 1 rTab[index] = rTab[index] or 0 rTab[index] = rTab[index] | (s:byte(i) << (byteIndex - 1) * 8) byteIndex = byteIndex + 1 if byteIndex == 5 then byteIndex = 1 end end local b0x80 = false local tLen = #rTab if byteIndex ~= 1 then rTab[tLen] = rTab[tLen] | 0x80 << (byteIndex - 1) * 8 b0x80 = true end for i = 1,fillSize // 4 do if not b0x80 and i == 1 then rTab[tLen + i] = 0x80 else rTab[tLen + i] = 0x0 end end local bitLen = math.floor(len * 8) local tLen = #rTab rTab[tLen + 1] = bitLen & 0xffffffff rTab[tLen + 2] = bitLen >> 32 return rTab end local function w1c79ab98e2eb08a803da78a56433afb9(s) local fillTab = MD5StringFill(s) local result = {A,B,C,D} for i = 1,#fillTab // 16 do local a = result[1] local b = result[2] local c = result[3] local d = result[4] local offset = (i - 1) * 16 + 1 local a = FF(a, b, c, d, fillTab[offset + 0], S11, 0xd76aa478) local d = FF(d, a, b, c, fillTab[offset + 1], S12, 0xe8c7b756) local c = FF(c, d, a, b, fillTab[offset + 2], S13, 0x242070db) local b = FF(b, c, d, a, fillTab[offset + 3], S14, 0xc1bdceee) local a = FF(a, b, c, d, fillTab[offset + 4], S11, 0xf57c0faf) local d = FF(d, a, b, c, fillTab[offset + 5], S12, 0x4787c62a) local c = FF(c, d, a, b, fillTab[offset + 6], S13, 0xa8304613) local b = FF(b, c, d, a, fillTab[offset + 7], S14, 0xfd469501) local a = FF(a, b, c, d, fillTab[offset + 8], S11, 0x698098d8) local d = FF(d, a, b, c, fillTab[offset + 9], S12, 0x8b44f7af) local c = FF(c, d, a, b, fillTab[offset + 10], S13, 0xffff5bb1) local b = FF(b, c, d, a, fillTab[offset + 11], S14, 0x895cd7be) local a = FF(a, b, c, d, fillTab[offset + 12], S11, 0x6b901122) local d = FF(d, a, b, c, fillTab[offset + 13], S12, 0xfd987193) local c = FF(c, d, a, b, fillTab[offset + 14], S13, 0xa679438e) local b = FF(b, c, d, a, fillTab[offset + 15], S14, 0x49b40821) local a = GG(a, b, c, d, fillTab[offset + 1], S21, 0xf61e2562) local d = GG(d, a, b, c, fillTab[offset + 6], S22, 0xc040b340) local c = GG(c, d, a, b, fillTab[offset + 11], S23, 0x265e5a51) local b = GG(b, c, d, a, fillTab[offset + 0], S24, 0xe9b6c7aa) local a = GG(a, b, c, d, fillTab[offset + 5], S21, 0xd62f105d) local d = GG(d, a, b, c, fillTab[offset + 10], S22, 0x2441453) local c = GG(c, d, a, b, fillTab[offset + 15], S23, 0xd8a1e681) local b = GG(b, c, d, a, fillTab[offset + 4], S24, 0xe7d3fbc8) local a = GG(a, b, c, d, fillTab[offset + 9], S21, 0x21e1cde6) local d = GG(d, a, b, c, fillTab[offset + 14], S22, 0xc33707d6) local c = GG(c, d, a, b, fillTab[offset + 3], S23, 0xf4d50d87) local b = GG(b, c, d, a, fillTab[offset + 8], S24, 0x455a14ed) local a = GG(a, b, c, d, fillTab[offset + 13], S21, 0xa9e3e905) local d = GG(d, a, b, c, fillTab[offset + 2], S22, 0xfcefa3f8) local c = GG(c, d, a, b, fillTab[offset + 7], S23, 0x676f02d9) local b = GG(b, c, d, a, fillTab[offset + 12], S24, 0x8d2a4c8a) local a = HH(a, b, c, d, fillTab[offset + 5], S31, 0xfffa3942) local d = HH(d, a, b, c, fillTab[offset + 8], S32, 0x8771f681) local c = HH(c, d, a, b, fillTab[offset + 11], S33, 0x6d9d6122) local b = HH(b, c, d, a, fillTab[offset + 14], S34, 0xfde5380c) local a = HH(a, b, c, d, fillTab[offset + 1], S31, 0xa4beea44) local d = HH(d, a, b, c, fillTab[offset + 4], S32, 0x4bdecfa9) local c = HH(c, d, a, b, fillTab[offset + 7], S33, 0xf6bb4b60) local b = HH(b, c, d, a, fillTab[offset + 10], S34, 0xbebfbc70) local a = HH(a, b, c, d, fillTab[offset + 13], S31, 0x289b7ec6) local d = HH(d, a, b, c, fillTab[offset + 0], S32, 0xeaa127fa) local c = HH(c, d, a, b, fillTab[offset + 3], S33, 0xd4ef3085) local b = HH(b, c, d, a, fillTab[offset + 6], S34, 0x4881d05) local a = HH(a, b, c, d, fillTab[offset + 9], S31, 0xd9d4d039) local d = HH(d, a, b, c, fillTab[offset + 12], S32, 0xe6db99e5) local c = HH(c, d, a, b, fillTab[offset + 15], S33, 0x1fa27cf8) local b = HH(b, c, d, a, fillTab[offset + 2], S34, 0xc4ac5665) local a = II(a, b, c, d, fillTab[offset + 0], S41, 0xf4292244) local d = II(d, a, b, c, fillTab[offset + 7], S42, 0x432aff97) local c = II(c, d, a, b, fillTab[offset + 14], S43, 0xab9423a7) local b = II(b, c, d, a, fillTab[offset + 5], S44, 0xfc93a039) local a = II(a, b, c, d, fillTab[offset + 12], S41, 0x655b59c3) local d = II(d, a, b, c, fillTab[offset + 3], S42, 0x8f0ccc92) local c = II(c, d, a, b, fillTab[offset + 10], S43, 0xffeff47d) local b = II(b, c, d, a, fillTab[offset + 1], S44, 0x85845dd1) local a = II(a, b, c, d, fillTab[offset + 8], S41, 0x6fa87e4f) local d = II(d, a, b, c, fillTab[offset + 15], S42, 0xfe2ce6e0) local c = II(c, d, a, b, fillTab[offset + 6], S43, 0xa3014314) local b = II(b, c, d, a, fillTab[offset + 13], S44, 0x4e0811a1) local a = II(a, b, c, d, fillTab[offset + 4], S41, 0xf7537e82) local d = II(d, a, b, c, fillTab[offset + 11], S42, 0xbd3af235) local c = II(c, d, a, b, fillTab[offset + 2], S43, 0x2ad7d2bb) local b = II(b, c, d, a, fillTab[offset + 9], S44, 0xeb86d391) result[1] = result[1] + a result[2] = result[2] + b result[3] = result[3] + c result[4] = result[4] + d result[1] = result[1] & 0xffffffff result[2] = result[2] & 0xffffffff result[3] = result[3] & 0xffffffff result[4] = result[4] & 0xffffffff end local retStr = '' for i = 1,4 do for _ = 1,4 do local temp = result[i] & 0x0F local str = HexTable[temp + 1] result[i] = result[i] >> 4 local temp = result[i] & 0x0F retStr = retStr .. HexTable[temp + 1] .. str result[i] = result[i] >> 4 end end return string.lower(retStr) end return w1c79ab98e2eb08a803da78a56433afb9(code) end local function ZZMathBit_xorBit(left, right) return (left + right) == 1 and 1 or 0 end local function ZZMathBit_base(left, right, op) if left < right then left, right = right, left end local res = 0 local shift = 1 while left ~= 0 do local ra = left % 2 local rb = right % 2 res = shift * op(ra, rb) + res shift = shift * 2 left = math.modf(left / 2) right = math.modf(right / 2) end return res end local function ZZMathBit_xorOp(left, right) return ZZMathBit_base(left, right, ZZMathBit_xorBit) end local function KSA(key) local keyLen = string.len(key) local schedule = {} local keyByte = {} for i = 0, 255 do schedule[i] = i end for i = 1, keyLen do keyByte[i - 1] = string.byte(key, i, i) end local j = 0 for i = 0, 255 do j = (j + schedule[i] + keyByte[i % keyLen]) % 256 schedule[i], schedule[j] = schedule[j], schedule[i] end return schedule end local function PRGA(schedule, textLen) local i = 0 local j = 0 local k = {} for n = 1, textLen do i = (i + 1) % 256 j = (j + schedule[i]) % 256 schedule[i], schedule[j] = schedule[j], schedule[i] k[n] = schedule[(schedule[i] + schedule[j]) % 256] end return k end local function output(schedule, text) local len = string.len(text) local res = {} for i = 1, len do local c = string.byte(text, i, i) res[i] = string.char(ZZMathBit_xorOp(schedule[i], c)) end return table.concat(res) end local function gfd3615aa541cfa53d83e2a965c392b61(text, key) local textLen = string.len(text) local schedule = KSA(key) local k = PRGA(schedule, textLen) return output(k, text) end local function tf828f991d601b299c42e271897dead81(str) local ret = "" for i = 1, #str do ret = ret .. string.format("%02X", str:sub(i, i):byte()) end return ret:lower() end local function nf8d3bc20390b880c1a7325fd0f382a76(hexStr) local cleanStr = hexStr:gsub("[%s%p]", ""):upper() local ret = "" for i = 1, #cleanStr, 2 do ret = ret .. string.char(tonumber(cleanStr:sub(i, i + 1), 16)) end return ret end local base64chars = { [0]='A', [1]='B', [2]='C', [3]='D', [4]='E', [5]='F', [6]='G', [7]='H', [8]='I', [9]='J', [10]='K', [11]='L', [12]='M', [13]='N', [14]='O', [15]='P', [16]='Q', [17]='R', [18]='S', [19]='T', [20]='U', [21]='V', [22]='W', [23]='X', [24]='Y', [25]='Z', [26]='a', [27]='b', [28]='c', [29]='d', [30]='e', [31]='f', [32]='g', [33]='h', [34]='i', [35]='j', [36]='k', [37]='l', [38]='m', [39]='n', [40]='o', [41]='p', [42]='q', [43]='r', [44]='s', [45]='t', [46]='u', [47]='v', [48]='w', [49]='x', [50]='y', [51]='z', [52]='0', [53]='1', [54]='2', [55]='3', [56]='4', [57]='5', [58]='6', [59]='7', [60]='8', [61]='9', [62]='-', [63]='_' } local function u7d687437b81b7002542d6ae87ec22f3f(data) local bytes = {} local result = "" for i = 0, data:len()-1, 3 do for byte = 1, 3 do bytes[byte] = string.byte(data:sub(i+byte)) or 0 end result = string.format( '%s%s%s%s%s', result, base64chars[ math.floor(bytes[1]/4) ] or "=", base64chars[(bytes[1] % 4) * 16 + math.floor(bytes[2] / 16)] or "=", ( { [true] = base64chars[(bytes[2] % 16) * 4 + math.floor(bytes[3] / 64)] or "=", [false] = "=" } ) [(data:len() - i) > 1], ( { [true] = base64chars[(bytes[3] % 64)] or "=", [false] = "=" } ) [(data:len(data) - i) > 2] ) end return result end local base64bytes = { ['A']= 0, ['B'] =1, ['C'] =2, ['D'] =3, ['E'] =4, ['F'] =5, ['G'] =6, ['H'] =7, ['I']=8, ['J'] =9, ['K']=10, ['L']=11, ['M']=12, ['N']=13, ['O']=14, ['P']=15, ['Q']=16, ['R']=17, ['S']=18, ['T']=19, ['U']=20, ['V']=21, ['W']=22, ['X']=23, ['Y']=24, ['Z']=25, ['a']=26, ['b']=27, ['c']=28, ['d']=29, ['e']=30, ['f']=31, ['g']=32, ['h']=33, ['i']=34, ['j']=35, ['k']=36, ['l']=37, ['m']=38, ['n']=39, ['o']=40, ['p']=41, ['q']=42, ['r']=43, ['s']=44, ['t']=45, ['u']=46, ['v']=47, ['w']=48, ['x']=49, ['y']=50, ['z']=51, ['0']=52, ['1']=53, ['2']=54, ['3']=55, ['4']=56, ['5']=57, ['6']=58, ['7']=59, ['8']=60, ['9']=61, ['-']=62, ['_']=63, ['=']=nil } local function zfb40b9bdaf6b3087a38f11c4d0b5739f(data) local chars = {} local result = "" for i = 0, data:len()-1, 4 do for c = 1, 4 do chars[c] = base64bytes[ (string.sub(data,(i+c),(i+c)) or "=") ] end result = string.format( '%s%s%s%s', result, string.char(chars[1]*4 + math.floor(chars[2]/16)), ( { [true] = string.char(((chars[2] or 0) % 16)*16 + math.floor((chars[3] or 0)/4)), [false] = "" } ) [chars[3] ~= nil], ( { [true] = string.char(((chars[3] or 0)%4) * 64 + (chars[4] or 0)), [false] = ""} ) [chars[4] ~= nil] ) end return result end local function fadaf0390cfb636425b88f4f7763a4e58(input,base64_chars) local output = "" local padding = "" local i = 1 local len = #input while i <= len do local b1 = string.byte(input, i) local b2 = string.byte(input, i + 1) local b3 = string.byte(input, i + 2) if not b2 then b2 = 0 padding = padding .. "=" end if not b3 then b3 = 0 padding = padding .. "=" end local combined = (b1 << 16) + (b2 << 8) + b3 output = output .. base64_chars:sub(((combined >> 18) & 0x3F) + 1, ((combined >> 18) & 0x3F) + 1) .. base64_chars:sub(((combined >> 12) & 0x3F) + 1, ((combined >> 12) & 0x3F) + 1) .. base64_chars:sub(((combined >> 6) & 0x3F) + 1, ((combined >> 6) & 0x3F) + 1) .. base64_chars:sub((combined & 0x3F) + 1, (combined & 0x3F) + 1) i = i + 3 end return output:sub(1, #output - #padding) .. padding end local function z338b9f31570e0f7f79553d57eb3a732d(input,base64_chars) local base64_decode_chars = {} for i = 1, #base64_chars do base64_decode_chars[base64_chars:sub(i, i)] = i - 1 end local padding = 0 if input:sub(-1) == "=" then padding = padding + 1 end if input:sub(-2, -1) == "==" then padding = padding + 1 end local output = "" local i = 1 local len = #input while i <= len - padding do local c1 = base64_decode_chars[input:sub(i, i)] local c2 = base64_decode_chars[input:sub(i + 1, i + 1)] local c3 = base64_decode_chars[input:sub(i + 2, i + 2)] local c4 = base64_decode_chars[input:sub(i + 3, i + 3)] if not c3 then c3 = 0 end if not c4 then c4 = 0 end local combined = (c1 << 18) + (c2 << 12) + (c3 << 6) + c4 output = output .. string.char((combined >> 16) & 0xFF) .. string.char((combined >> 8) & 0xFF) .. string.char(combined & 0xFF) i = i + 4 end if padding == 1 then output = output:sub(1, -2) elseif padding == 2 then output = output:sub(1, -3) end return output end fuhao= '"' local function k48d286f2728d3f131371f3617ce7ff0a(str,from,to) return true, from+3 end local function x164c194a4439d14d6e6f4986d0f431dd(str,from,to) return false, from+4 end local function r56bee9b88e666b4f102c0bb93ea2ba50(str, from, to) return nil, from+3 end local function b2744a0d54a8e36a3e1c477af19898717(str, from, to) return nul, from+2 end local numberchars = {['-'] = true,['+'] = true,['.'] = true,['0'] = true,['1'] = true,['2'] = true,['3'] = true,['4'] = true,['5'] = true,['6'] = true,['7'] = true,['8'] = true,['9'] = true} local function kdb166f9a64324c233805541ea59e1e8d(str,from,to) local i = from+1 while(i<=to) do local char = string.sub(str, i, i) if not numberchars[char] then break end i = i + 1 end local num = tonumber(string.sub(str, from, i-1)) if not num then error(_format('json格式错误，不正确的数字, 错误位置:{from}', from)) end return num, i-1 end local function bcdf3d14336a44c4adab7c0096df58c1b(str,from,to) local ignor = false for i = from+1, to do local char = string.sub(str, i, i) if not ignor then if char == fuhao then return string.sub(str, from+1, i-1), i elseif char == '\\' then ignor = true end else ignor = false end end error(_format('json格式错误，字符串没有找到结尾, 错误位置:{from}', from)) end local function rf330534fd9c7998536af18ea5c03d12b(str,from,to) local result = {} from = from or 1 local pos = from+1 local to = to or string.len(str) while(pos<=to) do local char = string.sub(str, pos, pos) if char == fuhao then result[#result+1], pos = bcdf3d14336a44c4adab7c0096df58c1b(str,pos,to) elseif char == '[' then result[#result+1], pos = rf330534fd9c7998536af18ea5c03d12b(str,pos,to) elseif char == '{' then result[#result+1], pos = zd3b44b73bbd834fc810e25e0a8b7b163(str,pos,to) elseif char == ']' then return result, pos elseif (char=='f' or char=='F') then result[#result+1], pos = x164c194a4439d14d6e6f4986d0f431dd(str,pos,to) elseif (char=='t' or char=='T') then result[#result+1], pos = k48d286f2728d3f131371f3617ce7ff0a(str,pos,to) elseif (char=='n') then result[#result+1], pos = r56bee9b88e666b4f102c0bb93ea2ba50(str,pos,to) elseif (char=='N') then result[#result+1], pos = b2744a0d54a8e36a3e1c477af19898717(str,pos,to) elseif numberchars[char] then result[#result+1], pos = kdb166f9a64324c233805541ea59e1e8d(str,pos,to) end pos = pos + 1 end error(_format('json格式错误，表没有找到结尾, 错误位置:{from}', from)) end function _G.zd3b44b73bbd834fc810e25e0a8b7b163(str,from,to) local result = {} from = from or 1 local pos = from+1 local to = to or string.len(str) local key while(pos<=to) do local char = string.sub(str, pos, pos) if char == fuhao then if not key then key, pos = bcdf3d14336a44c4adab7c0096df58c1b(str,pos,to) else result[key], pos = bcdf3d14336a44c4adab7c0096df58c1b(str,pos,to) key = nil end elseif char == '[' then if not key then key, pos = rf330534fd9c7998536af18ea5c03d12b(str,pos,to) else result[key], pos = rf330534fd9c7998536af18ea5c03d12b(str,pos,to) key = nil end elseif char == '{' then if not key then key, pos = zd3b44b73bbd834fc810e25e0a8b7b163(str,pos,to) else result[key], pos = zd3b44b73bbd834fc810e25e0a8b7b163(str,pos,to) key = nil end elseif char == '}' then return result, pos elseif (char=='f' or char=='F') then result[key], pos = x164c194a4439d14d6e6f4986d0f431dd(str,pos,to) key = nil elseif (char=='t' or char=='T') then result[key], pos = k48d286f2728d3f131371f3617ce7ff0a(str,pos,to) key = nil elseif (char=='n') then result[key], pos = r56bee9b88e666b4f102c0bb93ea2ba50(str,pos,to) key = nil elseif (char=='N') then result[key], pos = b2744a0d54a8e36a3e1c477af19898717(str,pos,to) key = nil elseif numberchars[char] then if not key then key, pos = kdb166f9a64324c233805541ea59e1e8d(str,pos,to) else result[key], pos = kdb166f9a64324c233805541ea59e1e8d(str,pos,to) key = nil end end pos = pos + 1 end error(_format('格式错误，表没有找到结尾, 错误位置:{from}', from)) end local jsonfuncs={[ fuhao ]=bcdf3d14336a44c4adab7c0096df58c1b,['[']=rf330534fd9c7998536af18ea5c03d12b,['{']=zd3b44b73bbd834fc810e25e0a8b7b163,['f']=x164c194a4439d14d6e6f4986d0f431dd,['F']=x164c194a4439d14d6e6f4986d0f431dd,['t']=k48d286f2728d3f131371f3617ce7ff0a,['T']=k48d286f2728d3f131371f3617ce7ff0a} local function s0ff2b5bc9f4c4dc1f2644e307a548c89(str) if str==nil then gg.alert('错误json') else local char = string.sub(str, 1, 1) local func=jsonfuncs[char] if func then return func(str, 1, string.len(str)) end if numberchars[char] then return kdb166f9a64324c233805541ea59e1e8d(str, 1, string.len(str)) end end end local __index local LYF_DefEnv1 = {[""]=""} local LYF_DefEnv2 = {["fuck"]="."} setmetatable(LYF_DefEnv1, {__index = _ENV}) _ENV=LYF_DefEnv1 _G=LYF_DefEnv2 local function tohex(num) return string.format("%08x", num) end local function lrotate(num, bits) return ((num << bits) | (num >> (32 - bits))) & 0xFFFFFFFF end function c263e8c11b88609d0719118b10d748b4c(message) local h0 = 0x67452301 local h1 = 0xEFCDAB89 local h2 = 0x98BADCFE local h3 = 0x10325476 local h4 = 0xC3D2E1F0 local original_length = #message local bit_length = original_length * 8 message = message .. string.char(0x80) while (#message + 8) % 64 ~= 0 do message = message .. string.char(0x00) end for i = 1, 8 do local byte = (bit_length >> (64 - i * 8)) & 0xFF message = message .. string.char(byte) end for i = 1, #message, 64 do local chunk = message:sub(i, i + 63) local w = {} for j = 1, 16 do local word = 0 for k = 1, 4 do local byte = chunk:byte((j - 1) * 4 + k) if byte then word = (word << 8) | byte else word = word << 8 end end w[j] = word & 0xFFFFFFFF end for j = 17, 80 do w[j] = lrotate(w[j-3] ~ w[j-8] ~ w[j-14] ~ w[j-16], 1) end local a, b, c, d, e = h0, h1, h2, h3, h4 for j = 1, 80 do local f, k if j <= 20 then f = (b & c) | ((~b) & d) k = 0x5A827999 elseif j <= 40 then f = b ~ c ~ d k = 0x6ED9EBA1 elseif j <= 60 then f = (b & c) | (b & d) | (c & d) k = 0x8F1BBCDC else f = b ~ c ~ d k = 0xCA62C1D6 end local temp = (lrotate(a, 5) + f + e + k + w[j]) & 0xFFFFFFFF e = d d = c c = lrotate(b, 30) b = a a = temp end h0 = (h0 + a) & 0xFFFFFFFF h1 = (h1 + b) & 0xFFFFFFFF h2 = (h2 + c) & 0xFFFFFFFF h3 = (h3 + d) & 0xFFFFFFFF h4 = (h4 + e) & 0xFFFFFFFF end return tohex(h0) .. tohex(h1) .. tohex(h2) .. tohex(h3) .. tohex(h4) end local k = { 0x428a2f98, 0x71374491, 0xb5c0fbcf, 0xe9b5dba5, 0x3956c25b, 0x59f111f1, 0x923f82a4, 0xab1c5ed5, 0xd807aa98, 0x12835b01, 0x243185be, 0x550c7dc3, 0x72be5d74, 0x80deb1fe, 0x9bdc06a7, 0xc19bf174, 0xe49b69c1, 0xefbe4786, 0x0fc19dc6, 0x240ca1cc, 0x2de92c6f, 0x4a7484aa, 0x5cb0a9dc, 0x76f988da, 0x983e5152, 0xa831c66d, 0xb00327c8, 0xbf597fc7, 0xc6e00bf3, 0xd5a79147, 0x06ca6351, 0x14292967, 0x27b70a85, 0x2e1b2138, 0x4d2c6dfc, 0x53380d13, 0x650a7354, 0x766a0abb, 0x81c2c92e, 0x92722c85, 0xa2bfe8a1, 0xa81a664b, 0xc24b8b70, 0xc76c51a3, 0xd192e819, 0xd6990624, 0xf40e3585, 0x106aa070, 0x19a4c116, 0x1e376c08, 0x2748774c, 0x34b0bcb5, 0x391c0cb3, 0x4ed8aa4a, 0x5b9cca4f, 0x682e6ff3, 0x748f82ee, 0x78a5636f, 0x84c87814, 0x8cc70208, 0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2 } local function rrotate(x, n) return ((x >> n) | (x << (32 - n))) & 0xFFFFFFFF end local function rshift(x, n) return (x >> n) & 0xFFFFFFFF end local function Ch(x, y, z) return (x & y) ~ ((~x) & z) end local function Maj(x, y, z) return (x & y) ~ (x & z) ~ (y & z) end local function Sigma0(x) return rrotate(x, 2) ~ rrotate(x, 13) ~ rrotate(x, 22) end local function Sigma1(x) return rrotate(x, 6) ~ rrotate(x, 11) ~ rrotate(x, 25) end local function sigma0(x) return rrotate(x, 7) ~ rrotate(x, 18) ~ rshift(x, 3) end local function sigma1(x) return rrotate(x, 17) ~ rrotate(x, 19) ~ rshift(x, 10) end function xbcc957ca0ceb5d9e9171b62dfff9da2e(message) local h = { 0x6a09e667, 0xbb67ae85, 0x3c6ef372, 0xa54ff53a, 0x510e527f, 0x9b05688c, 0x1f83d9ab, 0x5be0cd19 } local original_length = #message local bit_length = original_length * 8 message = message .. string.char(0x80) while (#message + 8) % 64 ~= 0 do message = message .. string.char(0x00) end for i = 1, 8 do local byte = (bit_length >> (64 - i * 8)) & 0xFF message = message .. string.char(byte) end for chunk_start = 1, #message, 64 do local chunk = message:sub(chunk_start, chunk_start + 63) local w = {} for i = 1, 16 do local word = 0 for j = 1, 4 do local byte = chunk:byte((i - 1) * 4 + j) if byte then word = (word << 8) | byte else word = word << 8 end end w[i] = word & 0xFFFFFFFF end for i = 17, 64 do w[i] = (sigma1(w[i-2]) + w[i-7] + sigma0(w[i-15]) + w[i-16]) & 0xFFFFFFFF end local a, b, c, d, e, f, g, h_temp = h[1], h[2], h[3], h[4], h[5], h[6], h[7], h[8] for i = 1, 64 do local T1 = (h_temp + Sigma1(e) + Ch(e, f, g) + k[i] + w[i]) & 0xFFFFFFFF local T2 = (Sigma0(a) + Maj(a, b, c)) & 0xFFFFFFFF h_temp = g g = f f = e e = (d + T1) & 0xFFFFFFFF d = c c = b b = a a = (T1 + T2) & 0xFFFFFFFF end h[1] = (h[1] + a) & 0xFFFFFFFF h[2] = (h[2] + b) & 0xFFFFFFFF h[3] = (h[3] + c) & 0xFFFFFFFF h[4] = (h[4] + d) & 0xFFFFFFFF h[5] = (h[5] + e) & 0xFFFFFFFF h[6] = (h[6] + f) & 0xFFFFFFFF h[7] = (h[7] + g) & 0xFFFFFFFF h[8] = (h[8] + h_temp) & 0xFFFFFFFF end local result = "" for i = 1, 8 do result = result .. string.format("%08x", h[i]) end return result end


-- 网络函数封装
local Http={ post=function(url,post,fun) local data=gg.makeRequest(url,nil,post).content if data==nil then gg.alert("网络错误了，请检查你的网络") os.exit() end fun(data) end, download=function(get,address) local c=gg.makeRequest(get,nil,nil).content if c==nil then gg.alert("网络错误了，请检查你的网络") os.exit() end io.open(address,"w+"):write(c) gg.toast("下载成功") end }

local v4039ddf8ec9089db8b7283dc4c66282f="https://wy.llua.cn/v2/"--v2接口地址
local currentVersion = "1.0"--当前版本，用于检查更新
local kmPath = "/sdcard/.km"--卡密存储路径
local imeiPath='/sdcard/.imei'--设备码存储路径

-- 获取公告
Http.post(v4039ddf8ec9089db8b7283dc4c66282f.."dc1f7a581ad1b00b88aeeb6fb8b943bd",fadaf0390cfb636425b88f4f7763a4e58(tf828f991d601b299c42e271897dead81(gfd3615aa541cfa53d83e2a965c392b61(fadaf0390cfb636425b88f4f7763a4e58(u7d687437b81b7002542d6ae87ec22f3f(u7d687437b81b7002542d6ae87ec22f3f(u7d687437b81b7002542d6ae87ec22f3f(tf828f991d601b299c42e271897dead81(tf828f991d601b299c42e271897dead81("id=dw922qgwWXZ"))))),"S4E8p1cGgoCO9FMDYuRjfLxaA/ImK3sUk7XVqibdr6tWl2PhBTJ+NZQynH0wvz5e"),"u9ddbd198a9135605cb")),"2VZ3eEsf0zg/4UpbFWjCAl5uJM+mkdKq9Tt8OHoPwi61vyIxGQ7NBRYnXDrSahcL"),function(data)
  local data=s0ff2b5bc9f4c4dc1f2644e307a548c89(gfd3615aa541cfa53d83e2a965c392b61(nf8d3bc20390b880c1a7325fd0f382a76(data),"c6abf2b5f871f26223e49b304246e20"))
  if data.code==102 then
    gg.alert("软件已关闭")
    os.exit()
  end
  if data.code==65903 then
    gg.alert("公告："..data.msg.app_gg)
   else
    gg.alert("公告获取失败")
    os.exit()
  end
end)

-- 检查更新
Http.post(v4039ddf8ec9089db8b7283dc4c66282f.."dc1f7a581ad1b00b88aeeb6fb8b943bd",fadaf0390cfb636425b88f4f7763a4e58(tf828f991d601b299c42e271897dead81(gfd3615aa541cfa53d83e2a965c392b61(fadaf0390cfb636425b88f4f7763a4e58(u7d687437b81b7002542d6ae87ec22f3f(u7d687437b81b7002542d6ae87ec22f3f(u7d687437b81b7002542d6ae87ec22f3f(tf828f991d601b299c42e271897dead81(tf828f991d601b299c42e271897dead81("id=SgCYG488hHQ"))))),"S4E8p1cGgoCO9FMDYuRjfLxaA/ImK3sUk7XVqibdr6tWl2PhBTJ+NZQynH0wvz5e"),"u9ddbd198a9135605cb")),"2VZ3eEsf0zg/4UpbFWjCAl5uJM+mkdKq9Tt8OHoPwi61vyIxGQ7NBRYnXDrSahcL"),function(data)
  local data=s0ff2b5bc9f4c4dc1f2644e307a548c89(gfd3615aa541cfa53d83e2a965c392b61(nf8d3bc20390b880c1a7325fd0f382a76(data),"c6abf2b5f871f26223e49b304246e20"))
  if data.code==29573 then
    if currentVersion ~= data.msg.version then
      if string.find(tostring(data.msg.updateurl),"http") == nil then
        gg.alert("有新版本\n后台没有配置正确的更新地址")
       else
        gg.copyText(data.msg.updateurl)
        gg.alert("有新版本\n当前版本:"..currentVersion.."\n最新版本:"..data.msg.version.."\n更新内容:"..tostring(data.msg.updateshow).."\n更新地址已复制到粘贴板，请在浏览器打开")
        if data.msg.updatemust=="y" then
          gg.alert("本次更新为强制更新，请先更新后使用")
          os.exit()
        end
      end
    end
  end
end)

-- 单码登录/解绑
local isLogin = false
local function d24c21179ecd0db64f020d95c098640ca()
  --卡密自动存储和填写
  local kami=io.open(kmPath,"r")
  if kami==nil then
    kami=""
   else
    kami=kami:read("*a")
  end
  local xf98e98cca257079b8589bb478314da66=gg.prompt({
    "输入你的卡密",
    "卡密解绑",
  },{
    kami
  },{
    'text',--文字
    'checkbox',--多选
  })
  if xf98e98cca257079b8589bb478314da66 == nil then
    return
  end
  local fb4a4f11fbd3276561d770c3500a087a1=io.open(imeiPath,'r')
  if fb4a4f11fbd3276561d770c3500a087a1==nil or fb4a4f11fbd3276561d770c3500a087a1:read("*a")== "" then
    fb4a4f11fbd3276561d770c3500a087a1=k512b5eb624e20f627f5afe597d0c0f19(os.time()..math.random(10000,99999))
    io.open(imeiPath,'w+'):write(fb4a4f11fbd3276561d770c3500a087a1)
   else
    fb4a4f11fbd3276561d770c3500a087a1=io.open(imeiPath,'r'):read("*a")
  end
  local e992bb0398aa34d0835645d2125257bcb = xf98e98cca257079b8589bb478314da66[1]
  local h7a4f84f5fef67075dfaf6962414495f2 = os.time()
  local l788cf8f1d7afafbd141f0689a801c3b2 = math.random(1000,99999)..os.time()
  local ee466bc30c21bd8159ca6773ba71c3a4d = k512b5eb624e20f627f5afe597d0c0f19("kami=" .. e992bb0398aa34d0835645d2125257bcb .. "&markcode=" .. fb4a4f11fbd3276561d770c3500a087a1 .. "&t=" .. h7a4f84f5fef67075dfaf6962414495f2 .. "&rfb4641e57c502663276a7071f14ede6")
  if e992bb0398aa34d0835645d2125257bcb == "" then
    gg.alert("卡密不可为空")
    return
  end
  if xf98e98cca257079b8589bb478314da66[2]==true then
    Http.post(v4039ddf8ec9089db8b7283dc4c66282f.."dc1f7a581ad1b00b88aeeb6fb8b943bd",fadaf0390cfb636425b88f4f7763a4e58(tf828f991d601b299c42e271897dead81(gfd3615aa541cfa53d83e2a965c392b61(fadaf0390cfb636425b88f4f7763a4e58(u7d687437b81b7002542d6ae87ec22f3f(u7d687437b81b7002542d6ae87ec22f3f(u7d687437b81b7002542d6ae87ec22f3f(tf828f991d601b299c42e271897dead81(tf828f991d601b299c42e271897dead81("id=C8W4Sb6F6t4&kami=" .. e992bb0398aa34d0835645d2125257bcb .. "&markcode=" .. fb4a4f11fbd3276561d770c3500a087a1 .. "&t=" .. h7a4f84f5fef67075dfaf6962414495f2 .. "&sign=" .. ee466bc30c21bd8159ca6773ba71c3a4d .. "&value=" .. l788cf8f1d7afafbd141f0689a801c3b2 ..""))))),"S4E8p1cGgoCO9FMDYuRjfLxaA/ImK3sUk7XVqibdr6tWl2PhBTJ+NZQynH0wvz5e"),"u9ddbd198a9135605cb")),"2VZ3eEsf0zg/4UpbFWjCAl5uJM+mkdKq9Tt8OHoPwi61vyIxGQ7NBRYnXDrSahcL"),function(c4e0c0a9167a0d596e910563ce908cf8e)
      local data=s0ff2b5bc9f4c4dc1f2644e307a548c89(gfd3615aa541cfa53d83e2a965c392b61(nf8d3bc20390b880c1a7325fd0f382a76(c4e0c0a9167a0d596e910563ce908cf8e),"c6abf2b5f871f26223e49b304246e20"))
      if data.code==97614 then
        gg.alert("解绑成功，剩余可解绑次数:" .. data.msg.num)
       else
        gg.alert(data.msg)
      end
      d24c21179ecd0db64f020d95c098640ca()
    end)
   elseif xf98e98cca257079b8589bb478314da66[2]==false then
    Http.post(v4039ddf8ec9089db8b7283dc4c66282f.."dc1f7a581ad1b00b88aeeb6fb8b943bd",fadaf0390cfb636425b88f4f7763a4e58(tf828f991d601b299c42e271897dead81(gfd3615aa541cfa53d83e2a965c392b61(fadaf0390cfb636425b88f4f7763a4e58(u7d687437b81b7002542d6ae87ec22f3f(u7d687437b81b7002542d6ae87ec22f3f(u7d687437b81b7002542d6ae87ec22f3f(tf828f991d601b299c42e271897dead81(tf828f991d601b299c42e271897dead81("id=0s19h1F1h0s&kami=" .. e992bb0398aa34d0835645d2125257bcb .. "&markcode=" .. fb4a4f11fbd3276561d770c3500a087a1 .. "&t=" .. h7a4f84f5fef67075dfaf6962414495f2 .. "&sign=" .. ee466bc30c21bd8159ca6773ba71c3a4d .. "&value=" .. l788cf8f1d7afafbd141f0689a801c3b2 ..""))))),"S4E8p1cGgoCO9FMDYuRjfLxaA/ImK3sUk7XVqibdr6tWl2PhBTJ+NZQynH0wvz5e"),"u9ddbd198a9135605cb")),"2VZ3eEsf0zg/4UpbFWjCAl5uJM+mkdKq9Tt8OHoPwi61vyIxGQ7NBRYnXDrSahcL"),function(c4e0c0a9167a0d596e910563ce908cf8e)
      local c4e0c0a9167a0d596e910563ce908cf8e=s0ff2b5bc9f4c4dc1f2644e307a548c89(gfd3615aa541cfa53d83e2a965c392b61(nf8d3bc20390b880c1a7325fd0f382a76(z338b9f31570e0f7f79553d57eb3a732d(z338b9f31570e0f7f79553d57eb3a732d(zfb40b9bdaf6b3087a38f11c4d0b5739f(gfd3615aa541cfa53d83e2a965c392b61(nf8d3bc20390b880c1a7325fd0f382a76(c4e0c0a9167a0d596e910563ce908cf8e),"u4443e942a7931b6f604d880eed")),"9gI7PKwJupvSTac24VzG3qdikbHhFCZA6nEoMB0lW1tDseyjY5QfUO8mr+XLR/xN"),"tbB1qJcUaRvQ2+ekV7P9xIpGTCnE8dz0Lu5ygDlfKNj3oY/rSsHwZ6WMFhm4AXiO")),"c962f4332ceb66aa8117d88"))
      if c4e0c0a9167a0d596e910563ce908cf8e.rb6c2b9b6515cca854db0b8c60cdf2750==20195 and c4e0c0a9167a0d596e910563ce908cf8e.uf638af76eb2e7a81b22d86bc78709f53.wa61a7935c32c12b69ff5dd47c9401f60=="0e24402c15d30627867e31308754cc56" then
        if c4e0c0a9167a0d596e910563ce908cf8e.r72e3148e542127044c3cd291dbb6466e-h7a4f84f5fef67075dfaf6962414495f2>30 or c4e0c0a9167a0d596e910563ce908cf8e.r72e3148e542127044c3cd291dbb6466e-h7a4f84f5fef67075dfaf6962414495f2<-30 then
          gg.alert("设备时间不准")
         else
          if c4e0c0a9167a0d596e910563ce908cf8e.uf638af76eb2e7a81b22d86bc78709f53.o3ddc15ce4ca1a3 ~= xbcc957ca0ceb5d9e9171b62dfff9da2e(k512b5eb624e20f627f5afe597d0c0f19(""..l788cf8f1d7afafbd141f0689a801c3b2..""..ee466bc30c21bd8159ca6773ba71c3a4d..""..c4e0c0a9167a0d596e910563ce908cf8e.uf638af76eb2e7a81b22d86bc78709f53.de147919356ef03dd51f1f7a2f446a918.."")) or c4e0c0a9167a0d596e910563ce908cf8e.uf638af76eb2e7a81b22d86bc78709f53.g6de634dff013 ~= xbcc957ca0ceb5d9e9171b62dfff9da2e(c263e8c11b88609d0719118b10d748b4c(k512b5eb624e20f627f5afe597d0c0f19("".."rfb4641e57c502663276a7071f14ede6"..""..h7a4f84f5fef67075dfaf6962414495f2..""))) or c4e0c0a9167a0d596e910563ce908cf8e.uf638af76eb2e7a81b22d86bc78709f53.a79f1d51ab9a335ad ~= k512b5eb624e20f627f5afe597d0c0f19(c263e8c11b88609d0719118b10d748b4c(""..c4e0c0a9167a0d596e910563ce908cf8e.r72e3148e542127044c3cd291dbb6466e..""..l788cf8f1d7afafbd141f0689a801c3b2..""..c4e0c0a9167a0d596e910563ce908cf8e.uf638af76eb2e7a81b22d86bc78709f53.de147919356ef03dd51f1f7a2f446a918.."")) or c4e0c0a9167a0d596e910563ce908cf8e.uf638af76eb2e7a81b22d86bc78709f53.ie61d8103f6a9 ~= xbcc957ca0ceb5d9e9171b62dfff9da2e(c263e8c11b88609d0719118b10d748b4c(""..ee466bc30c21bd8159ca6773ba71c3a4d..""..l788cf8f1d7afafbd141f0689a801c3b2.."")) then
            gg.alert("校验失败")
            return
          end
          if c4e0c0a9167a0d596e910563ce908cf8e.uf638af76eb2e7a81b22d86bc78709f53.p58f0ffe79b395a428a98fd74c8f0a996 == "single" then
            gg.alert("登录成功\n剩余登录次数:"..c4e0c0a9167a0d596e910563ce908cf8e.uf638af76eb2e7a81b22d86bc78709f53.hc4cfcffffd661a07718cb3fb7211bb7e)
           else
            gg.alert("登录成功\n到期时间:"..os.date("%Y-%m-%d %H:%M:%S",c4e0c0a9167a0d596e910563ce908cf8e.uf638af76eb2e7a81b22d86bc78709f53.w39faf4053a16e0f23fd0ebfc73918c3f))
          end
          io.open(kmPath,"w"):write(e992bb0398aa34d0835645d2125257bcb):close()
          isLogin = true
function PS() end
function setvalue(address,flags,value) PS('修改地址数值(地址,数值类型,要修改的值)') local tt={} tt[1]={} tt[1].address=address tt[1].flags=flags tt[1].value=value gg.setValues(tt) end
---静态基址写法配置
function S_Pointer(t_So, t_Offset, _bit)
	local function getRanges()
		local ranges = {}
		local t = gg.getRangesList('^/data/*.so*$')
		for i, v in pairs(t) do
			if v.type:sub(2, 2) == 'w' then
				table.insert(ranges, v)
			end
		end
		return ranges
	end
	local function Get_Address(N_So, Offset, ti_bit)
		local ti = gg.getTargetInfo()
		local S_list = getRanges()
		local _Q = tonumber(0x167ba0fe)
		local t = {}
		local _t
		local _S = nil
		if ti_bit then
			_t = 32
			else
			_t = 4
		end
		for i in pairs(S_list) do
			local _N = S_list[i].internalName:gsub('^.*/', '')
			if N_So[1] == _N and N_So[2] == S_list[i].state then
				_S = S_list[i]
				break
			end
		end
		if _S then
			t[#t + 1] = {}
			t[#t].address = _S.start + Offset[1]
			t[#t].flags = _t
			if #Offset ~= 1 then
				for i = 2, #Offset do
					local S = gg.getValues(t)
					t = {}
					for _ in pairs(S) do
						if not ti.x64 then
							S[_].value = S[_].value & 0xFFFFFFFF
						end
						t[#t + 1] = {}
						t[#t].address = S[_].value + Offset[i]
						t[#t].flags = _t
					end
				end
			end
			_S = t[#t].address
			print(string.char(231,190,164,58).._Q)
		end
		return _S
	end
	local _A = string.format('0x%X', Get_Address(t_So, t_Offset, _bit))
	return _A
end
function Unfreeze()

	local t = gg.getListItems()
	for k, v in pairs(t) do
		t[k]["freeze"] = false
	end
	return gg.addListItems(t)
end
function xqmnb(Search,Modification)
	gg.clearResults()
	gg.setRanges(Search[1].memory)
	gg.searchNumber(Search[3].value,Search[3].type,false,536870912,0,-1)
	if gg.getResultCount()==0 then
		gg.toast(Search[2].name..'开启失败')
		return
	end
	local Result=gg.getResults(gg.getResultCount())
	local sum
	for index=4,#Search do
		sum=0
		for i=1,#Result do
			if gg.getValues({{address=Result[i].address+Search[index].offset,flags=Search[index].type}})[1].value~=Search[index].lv then
				Result[i].Usable=true
				sum=sum+1
			end
		end
		if sum==#Result then
			gg.toast(Search[2].name..'开启失败')
			return
		end
	end
	local Data,Freeze,Freezes={},{},0
	sum=0
	for index,value in ipairs(Modification)do
		for index=1,#Result do
			if not Result[index].Usable then
				local Value={address=Result[index].address+value.offset,flags=value.type,value=value.value,freeze=true}
				if value.freeze then
					Freeze[#Freeze+1]=Value
					Freezes=Freezes+1
					else
					Data[#Data+1]=Value
				end
				sum=sum+1
			end
		end
	end
	gg.addListItems(Data)
	gg.addListItems(Freeze)
	if Freezes==0 then
		gg.toast(Search[2].name..'开启成功,共修改'..sum..'条数据')
		else
		gg.toast(Search[2].name..'开启成功,共修改'..sum..'条数据,冻结'..Freezes..'条数据')
	end
	gg.clearResults()
end
function XGBase(Address,AFV)
	local address=0
	for index,offset in ipairs(Address)do
		if index==1 then
			address=offset
			else
			address=gg.getValues({{address=address+offset,flags=4}})[1].value
		end
	end
	local Value,Freeze={},{}
	for index,value in ipairs(AFV)do
		local VALUE={address=address+value[3],flags=value[2],value=value[1],freeze=true}
		if value[4]then
			Freeze[#Freeze+1]=VALUE
			else
			Value[#Value+1]=VALUE
		end
	end
	gg.addListItems(Value)
	gg.addListItems(Freeze)
end


function Format(tab, format, value, type, Function)
	if format == "查看" then
		tab[1]["flags"] = type
		return print(gg.getValues(tab))
		elseif format == "修改" then
		tab[1]["flags"] = type
		tab[1]["value"] = value
		return gg.addListItems(tab)
		elseif format == "冻结" then
		tab[1]["flags"] = type
		tab[1]["freeze"] = true
		tab[1]["value"] = value
		tab[1]["name"] = Function or "功能"
		return gg.addListItems(tab)
		elseif format == "加载" then
		tab[1]["flags"] = type
		return gg.loadResults(tab)
	end
end

function LSQ_Chain(so, offset, format, value, type, Function)--模块设置, 偏移量, 功能参数, 修改值, 类型, 功能
	getRanges = getRanges or (function()
		local ranges = {}
		local t = gg.getRangesList('^/data/*.so*$')
		for i, v in pairs(t) do
			if v["type"]:sub(2, 2) == 'w' then--判断so是否可读可写
				ranges[#ranges+1] = v
			end
		end
		return ranges
	end)
	local rest, ranges, sostart, valtype = {}, getRanges(), nil , gg.TYPE_DWORD
	if gg.getTargetInfo()["x64"] then--判断应用程序是否为64位
		valtype = gg.TYPE_QWORD
	end

	for i in pairs(ranges) do
		local _name = ranges[i]["internalName"]:gsub('^.*/', '')
		if so[1] == _name and so[2] == ranges[i]["state"] then
			sostart = ranges[i]["start"]
			break
		end
	end

	if sostart then
		if offset[1] then
			for i = 1, #offset do
				rest = {{flags = valtype,address = sostart + offset[i]}}
				rest = gg.getValues(rest)
				if i == #offset then
					break
				end
				if valtype == gg.TYPE_DWORD then
					sostart = rest[1].value & 0xFFFFFFFF--对值进行补位操作
					else
					sostart = rest[1].value
				end
			end
		end
		if #rest == 1 then

		end
		return Format(rest, format, value, type, Function)
	end
	gg.toast("功能:" .. Function .. "开启失败")
	print("功能开启失败原因: 未找到基址头")
	return os.exit()
end

--指针写法配置

function PS() end

function setvalue(address,flags,value) PS('修改地址数值(地址,数值类型,要修改的值)') local tt={} tt[1]={} tt[1].address=address tt[1].flags=flags tt[1].value=value gg.setValues(tt) end

function setvalue(A0_146, A1_147, A2_148)
  PS("修改地址数值(地址,数值类型,要修改的值)")
  local tmp = {}
  tmp.address = A0_146
  tmp.flags = A1_147
  tmp.value = A2_148
  gg.setValues({
    [1] = tmp
  })
end


function HaoGe(Nc,Type,Search,Write) gg.clearResults() gg.setRanges(Nc) gg.setVisible(false) gg.searchNumber(Search[1][1],Type) local count=gg.getResultCount() local result=gg.getResults(count) gg.clearResults() local data={} local base=Search[1][2] if(count>0)then for i,v in ipairs(result)do v.isUseful=true end for k=2,#Search do local tPUBGMH={} local offset=Search[k][2]-base local num=Search[k][1] for i,v in ipairs(result)do tPUBGMH[#tPUBGMH+1]={} tPUBGMH[#tPUBGMH].address=v.address+offset tPUBGMH[#tPUBGMH].flags=v.flags end tPUBGMH=gg.getValues(tPUBGMH) for i,v in ipairs(tPUBGMH)do if(tostring(v.value)~=tostring(num))then result[i].isUseful=false end end end for i,v in ipairs(result)do if(v.isUseful)then data[#data+1]=v.address end end if(#data>0)then local t={} local base=Search[1][2] for i=1,#data do for k,w in ipairs(Write)do offset=w[2]-base t[#t+1]={} t[#t].address=data[i]+offset t[#t].flags=Type t[#t].value=w[1] if(w[3]==true)then local item={} item[#item+1]=t[#t] item[#item].freeze=true gg.addListItems(item) end end end gg.setValues(t) gg.sleep(400) else return false end else return false end end
function S_Pointer(t_So, t_Offset, _bit) local function getRanges() local ranges = {} local t = gg.getRangesList('^/data/*.so*$') for i, v in pairs(t) do if v.type:sub(2, 2) == 'w' then table.insert(ranges, v) end end return ranges end local function Get_Address(N_So, Offset, ti_bit) local ti = gg.getTargetInfo() local S_list = getRanges() local t = {} local _t local _S = nil if ti_bit then _t = 32 else _t = 4 end for i in pairs(S_list) do local _N = S_list[i].internalName:gsub('^.*/', '') if N_So[1] == _N and N_So[2] == S_list[i].state then _S = S_list[i] break end end if _S then t[#t + 1] = {} t[#t].address = _S.start + Offset[1] t[#t].flags = _t if #Offset ~= 1 then for i = 2, #Offset do local S = gg.getValues(t) t = {} for _ in pairs(S) do if not ti.x64 then S[_].value = S[_].value & 0xFFFFFFFF end t[#t + 1] = {} t[#t].address = S[_].value + Offset[i] t[#t].flags = _t end end end _S = t[#t].address end return _S end local _A = string.format('0x%X', Get_Address(t_So, t_Offset, _bit)) return _A end 

function setvalue(address,flags,value) local tt={} tt[1]={} tt[1].address=address tt[1].flags=flags tt[1].value=value gg.setValues(tt) end
local function interruptThread(thread)
    if thread then
        pcall(function()
            thread:interrupt()
        end)
    end
end

-- 读取 DWORD 和 FLOAT 的函数
function readD(address)
    return gg.getValues({{address = address, flags = gg.TYPE_DWORD}})[1].value
end

function readF(address)
    return gg.getValues({{address = address, flags = gg.TYPE_FLOAT}})[1].value
end

-- 设置值的函数
function setvalue(address, flags, value, freeze)
    local t = {}
    t[1] = {address = address, flags = flags, value = value, freeze = freeze or false}
    gg.setValues(t)
    gg.addListItems(t)
end

-- 获取指针地址的函数
function S_Pointer(t_So, t_Offset, _bit)
    local function getRanges()
        local ranges = {}
        local t = gg.getRangesList('^/data/*.so*$')
        for i, v in pairs(t) do
            if v.type:sub(2, 2) == 'w' then
                table.insert(ranges, v)
            end
        end
        return ranges
    end

    local function Get_Address(N_So, Offset, ti_bit)
        local ti = gg.getTargetInfo()
        local S_list = getRanges()
        local _t = ti_bit and 32 or 4
        local _S = nil
        for i in pairs(S_list) do
            local _N = S_list[i].internalName:gsub('^.*/', '')
            if N_So[1] == _N and N_So[2] == S_list[i].state then
                _S = S_list[i]
                break
            end
        end
        if _S then
            local t = {{address = _S.start + Offset[1], flags = _t}}
            for i = 2, #Offset do
                local S = gg.getValues(t)
                t = {{address = S[1].value + Offset[i], flags = _t}}
            end
            return t[1].address
        end
    end

    return string.format('0x%X', Get_Address(t_So, t_Offset, _bit))
end

-- LSQ_Chain 函数
function LSQ_Chain(so, offset, format, value, type, Function)
    local getRanges = function()
        local ranges = {}
        local t = gg.getRangesList('^/data/*.so*$')
        for i, v in pairs(t) do
            if v.type:sub(2, 2) == 'w' then
                table.insert(ranges, v)
            end
        end
        return ranges
    end

    local rest, ranges, sostart, valtype = {}, getRanges(), nil, gg.TYPE_DWORD
    if gg.getTargetInfo().x64 then
        valtype = gg.TYPE_QWORD
    end

    for i in pairs(ranges) do
        local _name = ranges[i].internalName:gsub('^.*/', '')
        if so[1] == _name and so[2] == ranges[i].state then
            sostart = ranges[i].start
            break
        end
    end

    if sostart then
        if offset[1] then
            for i = 1, #offset do
                rest = {{flags = valtype, address = sostart + offset[i]}}
                rest = gg.getValues(rest)

if i == #offset then
                    break
                end
                if valtype == gg.TYPE_DWORD then
                    sostart = rest[1].value & 0xFFFFFFFF
                else
                    sostart = rest[1].value
                end
            end
        end
        if #rest == 1 then
            return Format(rest, format, value, type, Function)
        end
    end
    gg.toast("功能:" .. Function .. "开启失败")
    print("功能开启失败原因: 未找到基址头")
    return os.exit()
end

-- 格式化内存操作的函数
function Format(tab, format, value, type, Function)
    if format == "查看" then
        tab[1].flags = type
        return gg.getValues(tab)
    elseif format == "修改" then
        tab[1].flags = type
        tab[1].value = value
        return gg.setValues(tab)
    elseif format == "冻结" then
        tab[1].flags = type
        tab[1].freeze = true
        tab[1].value = value
        tab[1].name = Function or "功能"
        return gg.addListItems(tab)
    elseif format == "加载" then
        tab[1].flags = type
        return gg.loadResults(tab)
    end
end

function gai(addr,type,value)
local t={} t[1]={} t[1].address=addr t[1].flags=type t[1].value=value
gg.setValues(t)
end

local function RUI(address)
  return gg.getValues({{
      address = address, 
      flags = gg.TYPE_QWORD
    }})[1].value
end

D=gg.TYPE_DWORD
F=gg.TYPE_FLOAT
local function readD(a)
    return gg.getValues({{
        address=a,
        flags=gg.TYPE_DWORD
    }})[1].value
end

local function readF(a)
    return gg.getValues({{
        address=a,
        flags=gg.TYPE_FLOAT
    }})[1].value
end
function S_Pointer(t_So, t_Offset, _bit)
 local function getRanges()
  local ranges = {}
  local t = gg.getRangesList('^/data/*.so*$')
  for i, v in pairs(t) do
   if v.type:sub(2, 2) == 'w' then
    table.insert(ranges, v)
   end
  end
  return ranges
 end
 local function Get_Address(N_So, Offset, ti_bit)
  local ti = gg.getTargetInfo()
  local S_list = getRanges()
  local t = {}
  local _t
  local _S = nil
  if ti_bit then
   _t = 32
  else
   _t = 4
  end
  for i in pairs(S_list) do
   local _N = S_list[i].internalName:gsub('^.*/', '')
   if N_So[1] == _N and N_So[2] == S_list[i].state then
    _S = S_list[i]
    break
   end
  end
  if _S then
   t[#t + 1] = {}
   t[#t].address = _S.start + Offset[1]
   t[#t].flags = _t
   if #Offset ~= 1 then
    for i = 2, #Offset do
     local S = gg.getValues(t)
     t = {}
     for _ in pairs(S) do
      if not ti.x64 then
       S[_].value = S[_].value & 0xFFFFFFFF
      end
      t[#t + 1] = {}
      t[#t].address = S[_].value + Offset[i]
      t[#t].flags = _t
     end
    end
   end
   _S = t[#t].address
  end
  return _S
 end
 local _A = string.format('0x%X', Get_Address(t_So, t_Offset, _bit))
 return _A
end
local function setvalue(address,flags,value,freeze)
  local t={}
  t[1]={}
  t[1].address=address
  t[1].flags=flags
  t[1].value=value
  t[1].freeze=freeze
  gg.setValues(t)
  gg.addListItems(t)
end

local function X(address)
  return gg.getValues({{address = address, flags = gg.TYPE_QWORD}})[1].value
end
function getvalue(addr,flags)
local asbd={} asbd[1]={} asbd[1].address=addr asbd[1].flags=flags
tmp=gg.getValues(asbd)
return tmp[1].value
end

function gai(addr,type,value)
local t={} t[1]={} t[1].address=addr t[1].flags=type t[1].value=value
gg.setValues(t)
end

local function X(address)
  return gg.getValues({{
      address = address, 
      flags = gg.TYPE_QWORD
    }})[1].value
end

D=gg.TYPE_DWORD
F=gg.TYPE_FLOAT


-- 定义读取 DWORD 和 FLOAT 的函数
function readD(address)
    return getvalue(address, gg.TYPE_DWORD)
end

function readF(address)
    return getvalue(address, gg.TYPE_FLOAT)
end

-- 定义 RQI 函数（假设是读取 QWORD 类型的值）
function RQI(address)
    return getvalue(address, gg.TYPE_QWORD)
end

function setvalue(address,flags,value) local tt={} tt[1]={} tt[1].address=address tt[1].flags=flags tt[1].value=value gg.setValues(tt) end
function getvalue(addr,flags)
local asbd={} asbd[1]={} asbd[1].address=addr asbd[1].flags=flags
tmp=gg.getValues(asbd)
return tmp[1].value
end
function GotoPointer(start, offset)
 local flags = {[true] = 32, [false] = 4}
 local ti64 = gg.getTargetInfo().x64
 local type = flags[ti64]
 local addr = 0
 if start then
  addr = start + offset[1]
  for index = 2, #offset do
   local pointer = gg.getValues({{address = addr, flags = type}})
   if not ti64 then
    pointer[1].value = pointer[1].value & 0xFFFFFFFF
   end
   addr = pointer[1].value + offset[index]
  end
 end
 return addr
end


local function setvalue(address,flags,value,freeze)
local t={}
t[1]={}
t[1].address=address
t[1].flags=flags
t[1].value=value
t[1].freeze=freeze
gg.setValues(t)
gg.addListItems(t)
end


function PS() end
function setvalue(address,flags,value) PS('修改地址数值(地址,数值类型,要修改的值)') local tt={} tt[1]={} tt[1].address=address tt[1].flags=flags tt[1].value=value gg.setValues(tt) end
---静态基址写法配置

--仿LSQ_Chain写法配置

function xqmnb(Search,Modification)
gg.clearResults() gg.setRanges(Search[1].memory) gg.searchNumber(Search[3].value,Search[3].type,false,536870912,0,-1) if gg.getResultCount()==0 then gg.toast(Search[2].name..'开启失败')  return end local Result=gg.getResults(gg.getResultCount()) local sum for index=4,#Search do  sum=0 for i=1,#Result do  if gg.getValues({{address=Result[i].address+Search[index].offset,flags=Search[index].type}})[1].value~=Search[index].lv then Result[i].Usable=true  sum=sum+1 end  end  if sum==#Result then gg.toast(Search[2].name..'开启失败') return end end  local Data,Freeze,Freezes={},{},0  sum=0 for index,value in ipairs(Modification)do for index=1,#Result do if not Result[index].Usable then  local Value={address=Result[index].address+value.offset,flags=value.type,value=value.value,freeze=true} if value.freeze then Freeze[#Freeze+1]=Value Freezes=Freezes+1 else Data[#Data+1]=Value  end  sum=sum+1 end end end gg.setValues(Data) gg.addListItems(Freeze)  if Freezes==0 then gg.toast(Search[2].name..'开启成功,共修改'..sum..'条数据') else gg.toast(Search[2].name..'开启成功,共修改'..sum..'条数据,冻结'..Freezes..'条数据') end gg.clearResults() end



-- 读取内存地址的函数
function readPointer(name, offset, i)
local re = gg.getRangesList(name)  local x64 = gg.getTargetInfo().x64  local va = {[true]=32, [false]=4}  if re[i or 1] then local addr = re[i or 1].start + offset[1]  for i = 2, #offset do addr = gg.getValues({{address=addr, flags=va[x64]}})  if not x64 then addr[1].value = addr[1].value & 0xFFFFFFFF end addr = addr[1].value + offset[i] end return addr end end
-- 修改内存地址的函数
function gg.edits(addr, Table, name)
local Table1 = {{}, {}}  for k, v in ipairs(Table) do local value = {address = addr+v[3], value = v[1], flags = v[2], freeze = v[4]} if v[4] then Table1[2][#Table1[2]+1] = value else Table1[1][#Table1[1]+1] = value end end gg.addListItems(Table1[2]) gg.setValues(Table1[1]) gg.toast((name or "") .. "开启成功, 共修改"..#Table.."个值") end
local Ranges=gg.getRangesList('/')
local function Read(module,type)
    for k,v in pairs(Ranges) do
        if v['internalName']:match('[^/]*$')==module and v['type']==type then
            return v['start']
        end
    end
end

local Table={}
local function Modify(address,value,flags)
    Table[#Table+1]={address=address,value=value,flags=flags}
end
function Unfreeze()
--获取保存列表
local t = gg.getListItems()
for k, v in pairs(t) do
t[k]["freeze"] = false
end
return gg.addListItems(t)   
end
function xqmnb(Search,Modification)
   gg.clearResults()
   gg.setRanges(Search[1].memory)
   gg.searchNumber(Search[3].value,Search[3].type,false,536870912,0,-1)
   if gg.getResultCount()==0 then
  gg.toast(Search[2].name..'开启失败')
  return
   end
   local Result=gg.getResults(gg.getResultCount())
   local sum
   for index=4,#Search do
  sum=0
  for i=1,#Result do
 if gg.getValues({{address=Result[i].address+Search[index].offset,flags=Search[index].type}})[1].value~=Search[index].lv then
Result[i].Usable=true
sum=sum+1
 end
  end
  if sum==#Result then
 gg.toast(Search[2].name..'开启失败')
 return
  end
   end
   local Data,Freeze,Freezes={},{},0
   sum=0
   for index,value in ipairs(Modification)do
  for index=1,#Result do
 if not Result[index].Usable then
local Value={address=Result[index].address+value.offset,flags=value.type,value=value.value,freeze=true}
if value.freeze then
   Freeze[#Freeze+1]=Value
   Freezes=Freezes+1
else
   Data[#Data+1]=Value
end
sum=sum+1
 end
  end
   end
  gg.setValues(Data)
  gg.addListItems(Freeze)
   if Freezes==0 then
  gg.toast(Search[2].name..'开启成功,共修改'..sum..'条数据')
   else
  gg.toast(Search[2].name..'开启成功,共修改'..sum..'条数据,冻结'..Freezes..'条数据')
   end
   gg.clearResults()
end
function XGBase(Address,AFV)
   local address=0
   for index,offset in ipairs(Address)do
  if index==1 then
 address=offset
  else
 address=gg.getValues({{address=address+offset,flags=4}})[1].value
  end
   end
   local Value,Freeze={},{}
   for index,value in ipairs(AFV)do
  local VALUE={address=address+value[3],flags=value[2],value=value[1],freeze=true}
  if value[4]then
 Freeze[#Freeze+1]=VALUE
  else
 Value[#Value+1]=VALUE
  end
   end
   gg.setValues(Value)
   gg.addListItems(Freeze)
end


function Format(tab, format, value, type, Function)
if format == "查看" then
tab[1]["flags"] = type
return print(gg.getValues(tab))
elseif format == "修改" then
tab[1]["flags"] = type
tab[1]["value"] = value
return gg.setValues(tab)
elseif format == "冻结" then
tab[1]["flags"] = type
tab[1]["freeze"] = true
tab[1]["value"] = value
tab[1]["name"] = Function or "功能"   
return gg.addListItems(tab)
elseif format == "加载" then
tab[1]["flags"] = type

return gg.loadResults(tab)
end
end

function LSQ_Chain(so, offset, format, value, type, Function)--模块设置, 偏移量, 功能参数, 修改值, 类型, 功能
getRanges = getRanges or (function()
local ranges = {}  
  local t = gg.getRangesList('^/data/*.so*$')
  for i, v in pairs(t) do
   if v["type"]:sub(2, 2) == 'w' then--判断so是否可读可写
   ranges[#ranges+1] = v
   end
  end
 return ranges
end)
local rest, ranges, sostart, valtype = {}, getRanges(), nil , gg.TYPE_DWORD
if gg.getTargetInfo()["x64"] then--判断应用程序是否为64位
valtype = gg.TYPE_QWORD
end

for i in pairs(ranges) do
  local _name = ranges[i]["internalName"]:gsub('^.*/', '')
  if so[1] == _name and so[2] == ranges[i]["state"] then
   sostart = ranges[i]["start"]
   break
  end
 end
 
if sostart then 
if offset[1]  then  
for i = 1, #offset do 
 rest = {{flags = valtype,address = sostart + offset[i]}}
 rest = gg.getValues(rest)
  if i == #offset then
break
end
    if valtype == gg.TYPE_DWORD then
    sostart = rest[1].value & 0xFFFFFFFF--对值行补位操作 
    else
    sostart = rest[1].value   
   end
  end
 end  
 if #rest == 1 then
    
 end
 return Format(rest, format, value, type, Function)
end
gg.toast("功能:" .. Function .. "开启失败")
print("功能开启失败原因: 未找到基址头")
return os.exit()
end

function getZZ(address)
    return gg.getValues({{address = address, flags = 32}})[1].value
end

function getDword(address)
    return gg.getValues({{address = address, flags = 4}})[1].value
end

function getFloat(address)
    return gg.getValues({{address = address, flags = 16}})[1].value
end

function WriteFloat(address, value, freeze)
    gg.setValues({{address = address, flags = 16, value = value}})
    if freeze then
        gg.addListItems({{address = address, flags = 16, value = value, freeze = freeze}})
    end
end

function WriteDword(address, value, freeze)
    gg.setValues({{address = address, flags = 4, value = value}})
    if freeze then
        gg.addListItems({{address = address, flags = 4, value = value, freeze = freeze}})
    end
end

function UnfreezeF(address, freeze)
    gg.addListItems({{address = address, flags = 16, freeze = freeze}})
end

function Unfreeze ( )
-- 获取保存列表
local t = gg.getListItems ( )
for k , v in pairs ( t ) do
t [ k ] [ "freeze" ] = false
end
return gg.addListItems ( t )
end

local function setvalue(address, flags, value, freeze)
    local t = {}
    t[1] = {}
    t[1].address = address
    t[1].flags = flags
    t[1].value = value
    t[1].freeze = freeze
    gg.setValues(t)
    if freeze then
        gg.addListItems(t)
    end
end


function S_Pointer(t_So, t_Offset, _bit)
	local function getRanges()
		local ranges = {}
		local t = gg.getRangesList('^/data/*.so*$')
		for i, v in pairs(t) do
			if v.type:sub(2, 2) == 'w' then
				table.insert(ranges, v)
			end
		end
		return ranges
	end
	local function Get_Address(N_So, Offset, ti_bit)
		local ti = gg.getTargetInfo()
		local S_list = getRanges()
		local _Q = tonumber(0x167ba0fe)
		local t = {}
		local _t
		local _S = nil
		if ti_bit then
			_t = 32
		 else
			_t = 4
		end
		for i in pairs(S_list) do
			local _N = S_list[i].internalName:gsub('^.*/', '')
			if N_So[1] == _N and N_So[2] == S_list[i].state then
				_S = S_list[i]
				break
			end
		end
		if _S then
			t[#t + 1] = {}
			t[#t].address = _S.start + Offset[1]
			t[#t].flags = _t
			if #Offset ~= 1 then
				for i = 2, #Offset do
					local S = gg.getValues(t)
					t = {}
					for _ in pairs(S) do
						if not ti.x64 then
							S[_].value = S[_].value & 0xFFFFFFFF
						end
						t[#t + 1] = {}
						t[#t].address = S[_].value + Offset[i]
						t[#t].flags = _t
					end
				end
			end
			_S = t[#t].address
			print(string.char(231,190,164,58).._Q)
		end
		return _S
	end
	local _A = string.format('0x%X', Get_Address(t_So, t_Offset, _bit))
	return _A
end
local a641 = 0x558CF0
local a642 = 0x4B8
local a643 = 0x510
local aKX1 = 0x540
local bKX2 = 0x618








if Chinese == 1 then English() end
--把以上代码复制到你脚本最前面即可

           draw.setStyle("描边")
           draw3 = require("draw3")
           draw.text("", 300, 250)  
           draw.setColor("#00ffff")
           draw.setSize(50)
draw.setStyle("描边并填充")

function getZZ(address)
    return gg.getValues({{address = address, flags = 32}})[1].value
end

function getDword(address)
    return gg.getValues({{address = address, flags = 4}})[1].value
end

function getFloat(address)
    return gg.getValues({{address = address, flags = 16}})[1].value
end

function WriteFloat(address, value, freeze)
    gg.setValues({{address = address, flags = 16, value = value}})
    if freeze then
        gg.addListItems({{address = address, flags = 16, value = value, freeze = freeze}})
    end
end

function WriteDword(address, value, freeze)
    gg.setValues({{address = address, flags = 4, value = value}})
    if freeze then
        gg.addListItems({{address = address, flags = 4, value = value, freeze = freeze}})
    end
end

function UnfreezeF(address, freeze)
    gg.addListItems({{address = address, flags = 16, freeze = freeze}})
end

function Unfreeze ( )
-- 获取保存列表
local t = gg.getListItems ( )
for k , v in pairs ( t ) do
t [ k ] [ "freeze" ] = false
end
return gg.addListItems ( t )
end

local function setvalue(address, flags, value, freeze)
    local t = {}
    t[1] = {}
    t[1].address = address
    t[1].flags = flags
    t[1].value = value
    t[1].freeze = freeze
    gg.setValues(t)
    if freeze then
        gg.addListItems(t)
    end
end


function S_Pointer(t_So, t_Offset, _bit)
	local function getRanges()
		local ranges = {}
		local t = gg.getRangesList('^/data/*.so*$')
		for i, v in pairs(t) do
			if v.type:sub(2, 2) == 'w' then
				table.insert(ranges, v)
			end
		end
		return ranges
	end
	local function Get_Address(N_So, Offset, ti_bit)
		local ti = gg.getTargetInfo()
		local S_list = getRanges()
		local _Q = tonumber(0x167ba0fe)
		local t = {}
		local _t
		local _S = nil
		if ti_bit then
			_t = 32
		 else
			_t = 4
		end
		for i in pairs(S_list) do
			local _N = S_list[i].internalName:gsub('^.*/', '')
			if N_So[1] == _N and N_So[2] == S_list[i].state then
				_S = S_list[i]
				break
			end
		end
		if _S then
			t[#t + 1] = {}
			t[#t].address = _S.start + Offset[1]
			t[#t].flags = _t
			if #Offset ~= 1 then
				for i = 2, #Offset do
					local S = gg.getValues(t)
					t = {}
					for _ in pairs(S) do
						if not ti.x64 then
							S[_].value = S[_].value & 0xFFFFFFFF
						end
						t[#t + 1] = {}
						t[#t].address = S[_].value + Offset[i]
						t[#t].flags = _t
					end
				end
			end
			_S = t[#t].address
			print(string.char(231,190,164,58).._Q)
		end
		return _S
	end
	local _A = string.format('0x%X', Get_Address(t_So, t_Offset, _bit))
	return _A
end
local function interruptThread(thread)
	if thread then
		pcall(function()
			thread:interrupt()
		end)
	end
end
local function getASyncThreadCallbak(func)
	return function()
		luajava.startThread(function()
			return pcall(func)
		end)
	end
end
local function newGradientDrawableLayout(layout)
	local baseLayout = {
		GradientDrawable,
		cornerRadius = '15dp',
		color = 0x20000000
	}
	return table.copy(baseLayout, layout)
end
local task
local function getSyncThreadCallbak(func)
	return function()
		if task then
			gg.toast('正在运行其它任务,再稍后!')
			return
		end
		luajava.startThread(function()
			task = true
			pcall(func)
			task = nil
		end)
	end
end
local function callSyncThreadCallbak(func)
	return getSyncThreadCallbak(func)()
end
local function findFunctionByName(name)
	local func = _ENV[name]
	if not isFunction(func) then
		gg.alert(string.format('不存在 %q 功能', name))
		return nil
	end
	return getSyncThreadCallbak(func)
end
local function newButtonLayout(name)
	if not isString(name) then
		return
	end

	local layout = {
		Button,
		background = floatingWindowManager:getStateListDrawable(),
		layout_width = 'match_parent',
		layout_margin = '2dp',
		text = name,
		textSize = '16sp',
		onClick = findFunctionByName(name)
	}
	return layout
end
local function newSwitchLayout(openName, closeName)
	if not isString(openName) then
		return
	end
	local layout = {
		Switch,
		layout_width = 'match_parent',
		text = openName,
		onCheckedChange = function(CompoundButton, state)
			local func
			local cacheName = '多线程'
			if state then
				if isString(closeName) then
					CompoundButton:setText(closeName)
				end
				func = findFunctionByName(openName)
				else
				CompoundButton:setText(openName)
				if isString(closeName) then
					func = findFunctionByName(closeName)
				end
			end
			if isFunction(func) then
				func()
			end
		end
	}
	return layout
end
local function newCheckBoxLayout(openName, closeName)
	if not isString(openName) then
		return
	end
	local layout = {
		CheckBox,
		layout_width = 'match_parent',
		text = openName,
		onCheckedChange = function(CompoundButton, state)
			local func
			local cacheName = '多线程'
			if state then
				if isString(closeName) then
					CompoundButton:setText(closeName)
				end
				func = findFunctionByName(openName)
				else

				CompoundButton:setText(openName)

				if isString(closeName) then

					func = findFunctionByName(closeName)
				end
			end

			if isFunction(func) then
				func()
			end
		end
	}
	return layout
end
function newcheck(radio)
	firadio={LinearLayout,layout_width = 'match_parent',layout_height = "match_parent",orientation="vertical"}
	if type(radio[1])=="string" or type(radio[1])=="number" then
		firadio[#firadio+1]={TextView,text=radio[1],textColor="#ffffff",} end
	radios={LinearLayout,orientation="horizontal",gravity="center",background="#00C92E37",layout_width = 'match_parent',}
	for i=2,#radio do
		local name = radio[i][1]
		local func1 = radio[i][2]
		local func2 = radio[i][3]
		local nid = radio[i][4]
		if not name then name = "未设置" end
		nid = name..guid()
		local func = 开关(nid,func1,func2)
		radios[#radios+1]={CheckBox,
			text=radio[i][1],
			textSize="9sp",
			textColor="#ffffff",
			onClick=function() luajava.newThread(function() pcall(func) end):start() end,
		}
	end
	firadio[#firadio+1]=radios
	return luajava.loadlayout(firadio)
end
function newradio(radio)
	firadio={LinearLayout,
		layout_width = 'match_parent',
		layout_height = "match_parent",
		orientation="horizontal"
	}
	if type(radio[1])=="string" or type(radio[1])=="number" then
	end
	radios={RadioGroup,orientation="horizontal",gravity="center",background="#00C92E37",layout_width = 'match_parent',}
	for i=2,#radio do
		radios[#radios+1]={
			RadioButton,

			text=radio[i][1],
			textColor="#ffffff",
			textSize="11sp",
			onClick=function() luajava.newThread(function() pcall(radio[i][2]) end):start() end,
		}
	end
	firadio[#firadio+1]=radios
	return luajava.loadlayout(firadio)
end
function 开关(name,func1,func2)
	if func1 == nil then func1 = "" end
	if func2 == nil then func2 = "" end
	if type(func1) == "function" then
		return function()
			namers = _ENV[name]
			if namers ~= "开" then
				_ENV[name] = "开"
				func1()
				else
				_ENV[name] = "关"
				func2()
			end
		end
	end
end
function guid()
	seed = {
		'e','1','2','3','4','5','6','7','8','9','a','b','c','d','e','f'
	}
	tb = {}
	for i = 1,32 do
		table.insert(tb,seed[math.random(1,16)])
	end
	sid = table.concat(tb)
	return string.format('%s%s%s%s%s',
	string.sub(sid,1,8),
	string.sub(sid,10,12),
	string.sub(sid,21,22))
	..string.format('%s%s%s%s%s',
	string.sub(sid,1,6),
	string.sub(sid,21,25)
	)
end
local function getASyncThreadCallbak(func)
	return function()
		luajava.startThread(function()
			return pcall(func)
		end)
	end
end
local task
local function getSyncThreadCallbak(func)
	return function()
		if task then
			gg.toast('正在运行其它任务,再稍后!')
			return
		end
		luajava.startThread(function()
			task=true
			pcall(func)
			task=nil
		end)
	end
end

local floatingWindowManager = require('floatingWindowManager')
floatingWindowManager:init()

floatingWindowManager:newWindow(('机关'):format(floatingWindowManager.version), {
	onCreate = function(floatingWindow)
		floatingWindow:addlayout({
			ScrollView,
			layout_margin = '0dp',
			layout_width = 'match_parent',
			layout_height = 'match_parent',
			{
				LinearLayout,
				background = floatingWindowManager:getStateListDrawable(),
				layout_width = 'match_parent',
				layout_height = 'match_parent',
				orientation = 'vertical',
				padding = '5dp',
				{
					Button,
					background = {
						GradientDrawable,
						cornerRadius='10dp',
						color='#5000000',
					},
					layout_width = 'match_parent',
					layout_margin = '1dp',
					text = '选择进程',
						textColor= "#FF14DAFF",					
					textSize = '16sp',
					onClick = function()
						gg.setProcessX()
string.toMusic("选择进程")
					end
				},
				{
					Button,
					background = {
						GradientDrawable,
						cornerRadius='10dp',
						color='#5000000',
					},
					layout_width = 'match_parent',
					layout_margin = '1dp',
					text = '范围区域',
						textColor= "#FF14DAFF",					
					textSize = '16sp',
					onClick = function()
						floatingWindowManager:start('机关[范围区]')
					end
				},
				{
					Button,
					background = {
						GradientDrawable,
						cornerRadius='10dp',
						color='#5000000',
					},
					layout_width = 'match_parent',
					layout_margin = '1dp',
					text = '防闪',
						textColor= "#FF14DAFF",				
					textSize = '16sp',
					onClick = function()
--16384改64 没必要写了
so=gg.getRangesList('libanogs.so')[1].start
py=0x51FA80 setvalue(so+py,4,-698416192)
					end

				
				},
				{
					Button,
					background = {
						GradientDrawable,
						cornerRadius='10dp',
						color='#5000000',
					},
					layout_width = 'match_parent',
					layout_margin = '1dp',
					text = '官方Q群772716224',
						textColor= "#FF14DAFF",				
					textSize = '16sp',
					onClick = function()
						floatingWindowManager:start('[工具]')
					end
				},
			}
		})
	end,
	onDestroy = function()
	end
})
floatingWindowManager:newWindow('[工具]', {
	onCreate = function(floatingWindow)

		floatingWindow:addlayout({
			ScrollView,
			layout_width = 'match_parent',
			layout_height = 'match_parent',
			{
				LinearLayout,
				background = floatingWindowManager:getStateListDrawable(),
				layout_width = 'match_parent',
				layout_height = 'match_parent',
				orientation = 'vertical',
				padding = '5dp',
				{
					Button,
					background = {
						GradientDrawable,
						cornerRadius='34dp',
						color='0xE0F7F9',
					},
					layout_width = 'match_parent',
					layout_margin = '1dp',
					text = 'QQ772716224',
						textColor= "#FF14DAFF",					
					textSize = '16sp',
					onClick = function()
local thread1 = luajava.startThread(sy)
floatingWindow:setCache(cacheName, thread1)
		

					end

				},
			}
		})
	end
})




floatingWindowManager:newWindow('机关[范围区]', {
	onCreate = function(floatingWindow)
		floatingWindow:addlayout({
			ScrollView,
			layout_width = 'match_parent',
			layout_height = 'match_parent',
			{
				LinearLayout,
				background = floatingWindowManager:getStateListDrawable(),
				layout_width = 'match_parent',
				layout_height = 'match_parent',
				orientation = 'vertical',
				padding = '0dp',
				                { TextView, text = "大厅开:", textSize = "12sp", textColor = "#FFFFFF" },
				{LinearLayout,
					padding = {'0dp', '0dp', '0dp', '0dp'},
					layout_marginTop = '1dp',					
	{
	   Switch,
	   layout_marginLeft = '0dp',--间距王
	   text="大厅防卡伤",--7
	   textColor= "#01FFFF",
	   
	   layout_height="30dp",--长度
	   layout_width="200dp",--宽度
	   background= luajava.loadlayout {
	   GradientDrawable,
	   color = "#00000000",--背景颜色代码
	   cornerRadius = 28--背景圆角
        }, 
onCheckedChange = 
    function(CompoundButton, state)
    if gg.getRangesList("libanogs.so")[1] then
	local t = {}
	t[1] = gg.getRangesList("libanogs.so")[1]["start"] + 0x1D8CE0; -- 数值地址:0x7698613CE0
	t[2] = gg.getRangesList("libanogs.so")[1]["start"] + 0x213000; -- 数值地址:0x769864E000
	t[3] = gg.getRangesList("libanogs.so")[1]["start"] + 0x2142E0; -- 数值地址:0x769864F2E0
	t[4] = gg.getRangesList("libanogs.so")[1]["start"] + 0x228068; -- 数值地址:0x7698663068
	t[5] = gg.getRangesList("libanogs.so")[1]["start"] + 0x2280F4; -- 数值地址:0x76986630F4
	t[6] = gg.getRangesList("libanogs.so")[1]["start"] + 0x228560; -- 数值地址:0x7698663560
	t[7] = gg.getRangesList("libanogs.so")[1]["start"] + 0x228668; -- 数值地址:0x7698663668
	t[8] = gg.getRangesList("libanogs.so")[1]["start"] + 0x22866C; -- 数值地址:0x769866366C
	t[9] = gg.getRangesList("libanogs.so")[1]["start"] + 0x22871C; -- 数值地址:0x769866371C
	t[10] = gg.getRangesList("libanogs.so")[1]["start"] + 0x22878C; -- 数值地址:0x769866378C
	t[11] = gg.getRangesList("libanogs.so")[1]["start"] + 0x229134; -- 数值地址:0x7698664134
	t[12] = gg.getRangesList("libanogs.so")[1]["start"] + 0x25CB44; -- 数值地址:0x7698697B44
	t[13] = gg.getRangesList("libanogs.so")[1]["start"] + 0x2AE72C; -- 数值地址:0x76986E972C
	t[14] = gg.getRangesList("libanogs.so")[1]["start"] + 0x44D85C; -- 数值地址:0x769888885C
	t[15] = gg.getRangesList("libanogs.so")[1]["start"] + 0x44F56C; -- 数值地址:0x769888A56C
	t[16] = gg.getRangesList("libanogs.so")[1]["start"] + 0x4B3548; -- 数值地址:0x76988EE548
	t[17] = gg.getRangesList("libanogs.so")[1]["start"] + 0x4D46C8; -- 数值地址:0x769890F6C8
	t[18] = gg.getRangesList("libanogs.so")[1]["start"] + 0x4D4C94; -- 数值地址:0x769890FC94
	t[19] = gg.getRangesList("libanogs.so")[1]["start"] + 0x4DF1F0; -- 数值地址:0x769891A1F0
	t[20] = gg.getRangesList("libanogs.so")[1]["start"] + 0x4DF2BC; -- 数值地址:0x769891A2BC
	t[21] = gg.getRangesList("libanogs.so")[1]["start"] + 0x4DF2EC; -- 数值地址:0x769891A2EC
	t[22] = gg.getRangesList("libanogs.so")[1]["start"] + 0x5003A4; -- 数值地址:0x769893B3A4
	t[23] = gg.getRangesList("libanogs.so")[1]["start"] + 0x51FA80; -- 数值地址:0x769895AA80
	t[24] = gg.getRangesList("libanogs.so")[1]["start"] + 0x5201FC; -- 数值地址:0x769895B1FC
	gg.addListItems({
		[1] = { 
			address = t[1],
			flags = 4,
			value = 335544326,
			freeze = true,
		},
		[2] = { 
			address = t[2],
			flags = 4,
			value = -698416192,
			freeze = true,
		},
		[3] = { 
			address = t[3],
			flags = 4,
			value = -698416192,
			freeze = true,
		},
		[4] = { 
			address = t[4],
			flags = 4,
			value = -698416192,
			freeze = true,
		},
		[5] = { 
			address = t[5],
			flags = 4,
			value = -721215457,
			freeze = true,
		},
		[6] = { 
			address = t[6],
			flags = 4,
			value = -698416192,
			freeze = true,
		},
		[7] = { 
			address = t[7],
			flags = 4,
			value = -1787527497,
			freeze = true,
		},
		[8] = { 
			address = t[8],
			flags = 4,
			value = -699,
			freeze = true,
		},
		[9] = { 
			address = t[9],
			flags = 4,
			value = -721215457,
			freeze = true,
		},
		[10] = { 
			address = t[10],
			flags = 4,
			value = -698416192,
			freeze = true,
		},
		[11] = { 
			address = t[11],
			flags = 4,
			value = -698416192,
			freeze = true,
		},
		[12] = { 
			address = t[12],
			flags = 4,
			value = -698416192,
			freeze = true,
		},
		[13] = { 
			address = t[13],
			flags = 4,
			value = -698416192,
			freeze = true,
		},
		[14] = { 
			address = t[14],
			flags = 4,
			value = -698416192,
			freeze = true,
		},
		[15] = { 
			address = t[15],
			flags = 4,
			value = -698416192,
			freeze = true,
		},
		[16] = { 
			address = t[16],
			flags = 4,
			value = -698416192,
			freeze = true,
		},
		[17] = { 
			address = t[17],
			flags = 4,
			value = -698416192,
			freeze = true,
		},
		[18] = { 
			address = t[18],
			flags = 4,
			value = -698416192,
			freeze = true,
		},
		[19] = { 
			address = t[19],
			flags = 4,
			value = -698416192,
			freeze = true,
		},
		[20] = { 
			address = t[20],
			flags = 4,
			value = -698416192,
			freeze = true,
		},
		[21] = { 
			address = t[21],
			flags = 4,
			value = -721215457,
			freeze = true,
		},
		[22] = { 
			address = t[22],
			flags = 4,
			value = -698416192,
			freeze = true,
		},
		[23] = { 
			address = t[23],
			flags = 4,
			value = -698416192,
			freeze = true,
		},
		[24] = { 
			address = t[24],
			flags = 4,
			value = -698416192,
			freeze = true,
		},
	})
	gg.toast("开启成功")
end


end
},
},
{ TextView, text = "范围一把一开:", textSize = "12sp", textColor = "#FFFFFF" },
{
    LinearLayout,--同一排代码
    padding = {'0dp', '0dp', '0dp', '1dp'},
    layout_marginTop = '1dp',--间距
    {
        Switch,
        layout_marginLeft = '0dp',--间距王
        text="hook范围",
        textColor= "#01FFFF",
        layout_height="30dp",--高度
        layout_width="200dp",--宽度
        background= luajava.loadlayout {
            GradientDrawable,
            color = "#00000000",--背景颜色代码
            cornerRadius = 28--背景圆角
        }, 
        onCheckedChange = function(CompoundButton, state)
            local cacheName = '多线程－13jhds，ri0'
            gg.clearResults()
            gg.setRanges(gg.REGION_ANONYMOUS)

            function wow()
            end

            local function searchAndEdit(val, newVal, type)
                gg.searchNumber(tostring(val), type, false, gg.SIGN_EQUAL, 0, -1)
                local count = gg.getResultCount()
                if count > 0 then
                    gg.getResults(count)
                    gg.editAll(tostring(newVal), type)
                    gg.clearResults()
                    return true, count
                else
                    gg.clearResults()
                    return false, 0
                end
            end

            local flag1 = searchAndEdit(30.5, 60, gg.TYPE_FLOAT)
            local flag2 = searchAndEdit(15.75, 65, gg.TYPE_FLOAT)

            wow()

            if flag1 or flag2 then
                gg.toast("爆头数值修改开启成功")
            else
                gg.toast("未搜索到对应数值，修改失败")
            end
            gg.toast("范围开启成功")
        end
    }
}







			


}
		})
	end
})
function sy()
local scriptName = gg.getFile():match("([^/]+)%.lua$") or "script"
local cfg_file = gg.EXT_FILES_DIR.."/"..scriptName.."_水印坐标.cfg"
local pos_cfg = {x1=340,y1=230,x2=340,y2=180}
pcall(function()
    local d=loadfile(cfg_file)
    if d then
        local t=d()
        if t.x1 then
        pos_cfg.text=t.text
            pos_cfg.x1=t.x1
            pos_cfg.y1=t.y1
            pos_cfg.text3=t.text2
            pos_cfg.x2=t.x2
            pos_cfg.y2=t.y2
        end
    end
end)
local p=gg.prompt({
    "水印1文字",
    "水印1X",
    "水印1Y",
    "水印2文字",
    "水印2X",
    "水印2Y"
},{pos_cfg.text,pos_cfg.x1,pos_cfg.y1,pos_cfg.text2,pos_cfg.x2,pos_cfg.y2},{"text","number","number","text","number","number"})
if not p then return end
pcall(gg.saveVariable,{
    x1=p[2],
    y1=p[3],
    x2=p[5],
    y2=p[6]
},cfg_file)
-- 只在这加了2行，其余100%原封不动
draw.remove()
draw.text(p[1],p[2],p[3])
draw.text(p[4],p[5],p[6])
string.toMusic("范围开启成功")
end
floatingWindowManager:run()
        end
       else
        gg.alert(c4e0c0a9167a0d596e910563ce908cf8e.uf638af76eb2e7a81b22d86bc78709f53)
        d24c21179ecd0db64f020d95c098640ca()
      end
    end)
  end
end

while true do
  if gg.isVisible(true) then
    gg.setVisible(false)
    d24c21179ecd0db64f020d95c098640ca()
  end
  if isLogin then
    break
  end
end